Hob Materials
2021-08-07 09:27:43
jiangxingTools
3239
Hob Materials
the standard material is the high speed steel EM2, EM35 and EM42. For higher cutting speeds and feeds, high-alloy high-speed steels ASP2030, ASP2052, S390, MC90 are used which were produced with the powder-metallurgy process.
An increase in performance over PM-HSS can be achieved by the new speedcore material. Speedcore is made from cobalt, molybdenum and carbon-free iron. This combination enables a marked increase of the read hardness of the cutting material compared to traditional PM-HSS substrates.
Carbide materials are used for high-performance milling in wet and dry machining or for skiving hobs.
相關(guān)文章
-
PA20° DP16 Standard Involute Gear Hob with BPⅡ
PA20° DP16 Standard Involute Gear Hob with BPⅡdiametral pitch: Dp16, pressure angle: PA20°hob size:... - PA30° Module Involute Spline Hob
- PA20° Pre-shave Gear Hobber Cutter with Module m1.5
- Standard Gear Shaving Cutter
- PA20° HSS M2 Material DIN3972 BP2 Module DP Involute Gear Hob Cutter with TiN Coating
- PA20° PCD 75mm Bowl Type Gear Shaper Cutter with Module m1~m4
- Timing Pulley Hob for (AT.)D.T AT10
