Information required when ordering shaper cutters
2021-08-27 11:21:59
jiangxingTools
2534
Information required when ordering shaper cutters
1, Quantity of shaper cutter
2, Type of cutter - Disc, Shank or Hub with
3, Bore diameter or type of shank fitting required.
4, Pitch - (DP, CP or Module)
5, Pressure Angle.
6, PCD - Approximate pitch circle diameter or number of teeth.
7, Material.
8, Coating.
9, Complete geara or detailed component drawings should be supplied when ordering non-standard gear shaping tools.
相關文章
-
PA30° PCD 125mm Deep Counterbore-Type Gear Shaper Cutter with Module m8~m10
PA30° PCD 125mm Deep Counterbore-Type Gear Shaper Cutter with Module m8~m10Material：HSS M2,M35, M42,... - PA20° DIN3972 Standard Gear Hob with Module m16
- GB STD Disk Type Straight Tooth Gear Shaper Cutter
- PA20° Profile DIN3972 Standard Gear Hobbing Tool with Module m5.5
- PA20° DP16 Standard Involute Gear Hob with BPⅡ
- Bohler S500 for Shaper Cutters and Hobs
- PA20° DP11 Standard Hob with BPⅡ
